RS7 Ultra X-LITE (SA2025)

Ultra Series

Developed through a collaboration with Penske Racing to reduce weight for use in NASCAR and engineered for dirt racing, this ultra-lightweight version of the RS7 Carbon combines an aerospace-grade carbon shell, reinforced energy absorbing liner system, and the performance features of the HP7 to create the most advanced, lightweight Snell rated helmet that can be used in some of the most most demanding forms of dirt racing. The RS7 Ultra Lite X-Lite features a sealed front to protect from dirt entering the helmet and comes equipped with a duckbill, Double Screen Anti-Fog (DSAF) visor and Bell Racing SmartLock Mechanism for optimal visibility and security.

RS7 Ultra X-LITE (SA2025)

Based on the innovative HP7 design and featuring a premium lightweight carbon shell specially designed for dirt racing

$2,199.95

Add Accessories

RS7 Ultra X-LITE (SA2025)
ADV-TX GLOVE SFI 3.3/5
$149.95
RS7 Ultra X-LITE (SA2025)
ADV-TX SUIT SFI 3.2A/5
$999.95
RS7 Ultra X-LITE (SA2025)
BREATH DEFLECTOR (V10)
$24.95
RS7 Ultra X-LITE (SA2025)
CHIN BAR GURNEY
$49.95
RS7 Ultra X-LITE (SA2025)
CHIN COVER SEAL (V10)
$29.95
RS7 Ultra X-LITE (SA2025)
HANS CLIP SET
$69.95
RS7 Ultra X-LITE (SA2025)
HELMET BAG (V15) PRO V.2 BELL
$79.95
RS7 Ultra X-LITE (SA2025)
PIVOT KIT SV (SE07-SE077-SE06)
$24.95
RS7 Ultra X-LITE (SA2025)
PRO-TX BALACLAVA SFI 3.3
$69.95
RS7 Ultra X-LITE (SA2025)
PRO-TX Bottom SFI 3.3
$99.95

RS7 Ultra X-LITE (SA2025)

Ultra Series

Developed through a collaboration with Penske Racing to reduce weight for use in NASCAR and engineered for dirt racing, this ultra-lightweight version of the RS7 Carbon combines an aerospace-grade carbon shell, reinforced energy absorbing liner system, and the performance features of the HP7 to create the most advanced, lightweight Snell rated helmet that can be used in some of the most most demanding forms of dirt racing. The RS7 Ultra Lite X-Lite features a sealed front to protect from dirt entering the helmet and comes equipped with a duckbill, Double Screen Anti-Fog (DSAF) visor and Bell Racing SmartLock Mechanism for optimal visibility and security.

Orders placed on the website are processed and shipped Monday through Friday.  Please allow up to 48 hours for orders to be shipped.

Orders placed with express shipping must be submitted by 3PM EST to ship same day

For returns read the complete regulation here.

54(6 3/4) – 55(6 7/8) – 56(7) – 57(7 1/8) – 58(7 1/4) – 59(7 3/8) – 60(7 1/2) – 61(7 5/8) – 61+ (7 5/8+)
Dark Grey High Strength – High Comfort FR Fabric

Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink and Orange

DETAILS
YOU'LL LOVE

RS7 Ultra X-LITE (SA2025)
  • Aerospace grade ultra-lightweight carbon shell
  • Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
  • Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
  • Interior ventilation channels enhanced to maximize airflow
  • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities
  • Integrated channels in face piece offer multiple options to install drink tube and radio systems
  • Non Ventilated
  • Rear spoilers, top gurney, and chin bar gurneys available separately
  • Factory installed Hans anchors as original equipment
  • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
  • Equipped with Bell Racing SmartLock Mechanism

HELMET
CARE AND MAINTENANCE

Proper care and maintenance are important in keeping your helmet in race-ready condition. The following exterior and interior care recommendations will help assure your helmet functions properly and is in peak condition.

Exterior care

All Bell Helmets are finished with a tough, polyurethane coating which resists scratching. When cleaning the exterior of your helmet, only use the highest quality products that are used for automotive finishes. It is up to the consumer to take great care of their helmet to assure no accidental damage is done to the helmet that may compromise the safety factor of the helmet. Do not use any abrasive or solvent based cleaners on the exterior of your helmet.

Interior care

The interior of the helmet is often susceptible to dirt and excess moisture. When cleaning the interior of your helmet, only use mild soap and water with a rag to hand wash the interior fit pad. When the interior of the helmet has become wet, allow the helmet to dry before putting it away for storage. We recommend properly drying and cleaning your helmet after every use to assure the best comfort level possible.

Helmet fitting guide

IMPORTANT: No helmet can protect the user from all foreseeable impacts. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision. 

Similar Products

You may also like…

RS7 Ultra X-LITE (SA2025)

Size comparison chart

Centimeters Generic Sizes Hat Size
51 4XS 6 3/8
52 3XS 6 1/2 - 6 5/8
53
54 XXS 6 3/4 - 6 7/8
55
XS 7
56
57 SML 7 1/8 - 7 1/4
58
MED 7 1/4 - 7 3/8
59
60 LRG 7 1/2
61
XLG 7 5/8 - 7 3/4
62
63 XXL 7 7/8 - 8
64
65 3XL 8 1/8 - 8 1/4
66
67 4XL 8 3/8 - 8 1/2
68

 

Sizing HP - Carbon - Pro

Centimeters Generic Sizes Hat Size
54 XXS 6 3/4 - 6 7/8
55
XS 7
56
57 SML 7 1/8 - 7 1/4
58
MED 7 1/4 - 7 3/8
59
60 LRG 7 1/2
61
XLG 7 5/8 - 7 3/4
61+

Interior Colors

Black and Dark grey colours are standard helmet interiors unless otherwise stated, while the other colours are interiors that can be ordered via special orders

RS7 Ultra X-LITE (SA2025)
Dark Grey
RS7 Ultra X-LITE (SA2025)
White
RS7 Ultra X-LITE (SA2025)
Tan
RS7 Ultra X-LITE (SA2025)
Green
RS7 Ultra X-LITE (SA2025)
Red
RS7 Ultra X-LITE (SA2025)
Pink
RS7 Ultra X-LITE (SA2025)
Blue
RS7 Ultra X-LITE (SA2025)
Neon Yellow
RS7 Ultra X-LITE (SA2025)
Purple
RS7 Ultra X-LITE (SA2025)
Orange